How To Operate A Forklift Pdf

Do not make repairs, alterations or adjustments to any industrial truck unless authorised. Forklift to increase load capacity is extremely dangerous.

Yale A875 2006 DE Lift Parts Manual PDF Download

In some states and territories you are also required to hold a licence to operate a forklift.

How to operate a forklift pdf. Handling loads with the forklift. Note that on the checklist. Divide by 2 the distance from the vertical face of the forks to the end of the load to get the load centre distance.

• never drill a hole in the forks to use as a way of towing something or as a place to put a chain hook when hoisting. Remove the key from the powered industrial truck and place a danger do not operate tag on the steering wheel or control lever of the powered industrial truck. The employee should take the completed checklist to the manager/supervisor and inform them of the problem.

How to operate a forklift: The operator of the forklift truck is responsible for operating in a safe manner; Do not operate an industrial truck with a leak in the fuel system.

For industrial trucks powered by an electric motor, know the location of the emergency isolator and know how to operate it. The forks, also known as blades or tines, If the load is not pushed up right against the forklift truck tines (forks).

A forklift is a type of “powered industrial truck” covered by dosh standards. The forklift operator drives the forklift forward until the forks push under the cargo, and can then lift the cargo several feet in the air by operating the forks. • always wear a seatbelt when the forklift has one.

Ways to prevent these hazards include: Like other powered industrial trucks, its purpose is to move, carry, push, pull, and lift a material load then stack it or place it in a storage rack (tier). All operations involving lift trucks must comply with the management of health and

A forklift is a vehicle similar to a small truck that has two metal forks on the front used to lift cargo. Slowly move forward then extend the forks by pressing the button near the control handle. Pedestrians use the same roadway, so sound the horn at intersections and blind spots.

Maintenance, supervision, maintenance and repair to repair equipment damage, maintain its technical. Supervisors assigning a worker to operate a forklift must ensure the worker is competent and closely supervised until the worker can work safely. Report the occurrence of any new hazard.

Check with your local workplace safety authority (see page 19) for requirements in your state or territory. The load centre distance is measured from the vertical face of the fork to the centre of gravity of the load. At all times, an operator’s hands, arms, feet, legs, and head must remain within the forklift truck.

When the forks are firmly in place, slowly raise the load and retract the forks. Identify, as appropriate, handling attachments which may. How to operate a stand up forklift.

Raymond 4100 forklift operation manual. Duties of workers workers are expected to: Traveling and maneuvering the forklift.

Forklift operations • always operate the vehicle according to the manufacturer’s instructions. Never operate a forklift for an extended time within a trailer or boxcar without proper ventilation. 200 deaths and 38,000 injuries/year.

Park the forklift in a safe place, on level ground; Schaeff operating manualschaeff operating manual 1616 2121 tilting &tilting & sideshiftingsideshifting tilt forward tilt back sideshift left sideshift right tilting the mast and sideshifting the carriage are controlled by a. Fitness to operate a lift truck (forklift) occupational health procedure.

The answer is anyone who wants to operate a forklift should be trained by an experienced trainer because forklifts poses many hazards. • locate the load’s center of gravity. A forklift is a powered industrial truck used to lift and move loads.

This raymond 4100 operation and owners manual contains information you need to operate your lift truck equipment. We’ll break down instruction on how to drive and operate a forklift into three sections: Do not start or operate your forklift, including any of its functions or attachments, from any place other than the designated operating position.

Onroad offroad training complex 24 jackson street, glenorchy tas 7010 onroad offroad devonport complex 129 wright st, east devonport tas 7310 • work and act safely. A moving forklift is a dangerous forklift.

Tlilic0003 licence to operate a forklift truck course duration and delivery: Here is our pdf bundle that includes the raymond 4100 forklift operation manual you need (pdf formats). Always face the direction of travel.

Planned preventive maintenance consists of the following measures: This procedure applies to anyone who is approved to operate a lift truck on behalf of loughborough university. Make sure to keep the load two inches away from the ground when moving.

To operate a forklift you must be trained and hold a relevant qualification. This includes avoiding all pedestrians in the work area. • use the training, instruction and personal protective equipment provided by the employer.

Never on a slope leave the forklift with the mast tilted forwards and the forks fully lowered, with the tips on the floor apply the parking brake, select neutral, switch off the engine and remove the key return keys or other activating devices to. • inspect the load for stability, projections, and damaged pallets before lifting. Raymond 4100 forklift operation manual pdf.

Access raymond 4100 forklift operation manual. If the lift truck is unsafe to operate: Forks, whether loaded or not, should be kept as low to the ground as possible and.

Manitou Forklift 3500Series Parts Manual PDF Download